Change Camera Mode; Powering On/Power Off/Energy Save - Vivitar 685HD User Manual

successfully installed.
6. To remove the card, gently press on the edge of the card to release it and pull the card out.
IMPORTANT: Please power the camera off before plugging in or taking out the memory card.
If the card is inserted or removed while the camcorder's power is on, it may damage the card
and/or any recorded data. Always confirm that the power is off before inserting the card into the
camcorder.
Make sure there is room on the Micro SD Memory Card for additional images. If the Micro SD
Memory Card is full, additional images will not be added to the memory card.
Formatting the Memory Card
It is recommended to format the memory card before first use, especially if the card was
previously used with another camera or there is unrecognized data on the card. To format the
card while in capture mode, long press the MODE button.

POWERING ON/POWER OFF/ENERGY SAVE

Change Camera Mode

7