Restore The Recovery Image For Full Hard Drive - Fujitsu STYLISTIC Q665 Operating Manual

7. For some earlier operating system images, the OS may not come with complete
Drivers/Applications installed. You can further determine that your OS is one of
these by verifying that a file "2016Update" is NOT located in "C:\Fujitsu\Model". In
this case follow the steps in "Installing the Software after the Recovery Image is
Restored" to download and install the required software applicable to the model
and OS.
Recover your system when the
hard drive is not bootable for
Windows 7/8/8.1

Restore the recovery image for full hard drive

Follow the steps in the "Recovering your Recovery Image using Recovery and Utility
(for new hard drive or non-bootable hard drive)" section. You will need the Bootable
Disc and the Recovery Disc Set for this task.
Utility tool: If applicable for your region, the Utility tool contains two options: Hard Disk
Data Delete and Partition Creation.
The Hard Disk Data Delete utility is used to delete all data on the hard disk and
■
prevent the data from being reused.
Note: Do not use the Hard Disk Data Delete utility unless you are absolutely
certain that you want to erase your entire hard disk, including
all partitions.
To delete hard disk data:
a. Click the [Hard Disk Data Delete] button. The progress bar appears, followed
by the EULA screen.
b. Agree to the EULA and click [Next].
c. Choose the hard disk from which the data should be deleted in the list of hard
disks and click [Next].
a. The Partition Creation utility is used to change the C: and D: drive partition sizes.
To run this utility: (This is not an option when using Windows 7.)
a. Click the [Partition Creation] button.
Fujitsu
105