Before Requesting Service - Panasonic NN-SD376S Operation Manual And Cookbook

Before Requesting Service

The oven causes
interference with my TV.
The oven lights dim.
Steam accumulates
on the oven door and warm
air comes from the oven
vents.
I accidentally ran my
microwave oven without
any food in it.
PROBLEM
Oven will not turn on.
When the oven is turning on,
there is noise coming from
Glass Tray.
Oven will not start cooking.
The word " " appears in
the Display Window.
If it seems there is a problem with the oven, contact an authorized Service Centre.
THESE THINGS ARE NORMAL
Some radio and TV interference might occur when you cook with the
microwave oven. This interference is similar to the interference caused by
small appliances such as mixers, vacuums, hair dryers, etc. It does not
indicate a problem with your oven.
When cooking with a power other than HIGH power, the oven must cycle to
obtain the lower power levels. The oven light will dim and clicking noises can
be heard when the oven cycles.
During cooking, steam and warm air are given off from the food. Most of
the steam and warm air are removed from the oven by the air which
circulates in the oven cavity. However, some steam will condense on
cooler surfaces such as the oven door. This is normal.
Running the oven empty for a short time will not damage the oven.
However, we do not recommend this.
POSSIBLE CAUSE
The oven is not plugged in
securely.
Circuit breaker or fuse is tripped
or blown.
There is a problem with the
outlet.
The roller ring and oven bottom
are dirty.
Start Pad was not pressed after
programming.
Another program has already
been entered into the oven.
The program has not been
entered correctly.
Stop/Reset Pad has been
pressed accidentally.
The door is not closed
completely.
The Child Lock was activated by
pressing Start Pad 3 times.
– 35 –
REMEDY
Remove plug from outlet, wait 10
seconds and re-insert.
Reset circuit breaker or
replace fuse.
Plug another appliance into the
outlet to check if the outlet is
working.
Clean these parts according
to care of your oven (See
next page).
Press Start Pad.
Press Stop/Reset Pad to cancel
the previous program and program
again.
Program again according to the
Operating Instructions.
Program oven again.
Close the oven door securely.
Deactivate Lock by pressing
Stop/Reset Pad 3 times.