Automatic Mode; Fan Mode - Dometic B2600 Operation, Maintenance And Installation Manual

AUTOMATIC MODE

MODE
+
-
AUTO
In this mode the fan button is disabled.
You can use the LIGHT** and ROOM button.
COOL / HEAT MODE
* (only for models equipped with resistance) - **(only for models equipped with light)
users ' instructions
Press the MODE button.
Set to "AUTO"
Choose the Set Point
(16°C - 31°C)
Press the MODE button.
MODE
Set to "COOL" or "HEAT"*
+
Choose the Set Point
-
(16°C - 31°C)
Choose the Fan Speed
You can use the LIGHT** and ROOM

FAN MODE

MODE
You can use the LIGHT** and ROOM button.
Available Fan speeds (Cool/Heat*/Fan Mode)
BATTERY COMPARTMENT
ON BACK SIDE OF REMOTE
CONTROL
1 2 3 4
11 B1600 - B1600PLUS - B2200 - B2600
general informations 1
Press the MODE button.
Set to "FAN"
Choose the Fan Speed
Low battery
The low battery symbol will
appear in the display window
when the low battery condition
exists.
In this case after each
command, the "low voltage
symbol" flickers for 2 seconds.
In these 2 seconds the remote
control is not able to send other
commands.
Replace the batteries
2x1.5V AAA
GB