Preventative Inspection And Maintenance - Extron electronics MPA 152 MD User Manual

Mini power amplifier
Hide thumbs Also See for MPA 152 MD:
Table of Contents

Advertisement

Preventative Inspection and Maintenance

1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth at least once every quarter.
Do not block any ventilation openings. Install in accordance with the instructions of the
manufacturer.
Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the third prong are provided for
your safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
All accessory equipment must be UL-listed.
Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.
It is the responsibility of the user that the system complies with the requirements of
the IEC 60601-1-1 system standard. If there are any questions or doubts, consult the
technical services department or your local representative. For more information, see the
MPA 152 MD Application Notes
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally, or has been dropped.
on page 1.
MPA 152 MD • Setup and Operation
10

Advertisement

Table of Contents
loading

Table of Contents