Rear Panel Connections - Harman Kardon AVR 2650 Service Manual

AVR 2650
AVR
Rear-Panel Connectors
Analog
Analog
Record Out
Record Out
Connector
Connector
HDMI
HDMI
Monitor Out
Monitor Out
Connector
Connector
Radio Antenna Subwoofer
Radio Antenna Subwoofer
Connectors Connector
Connectors Connector
Zone 2 Out Zone 2 Out
Connector
Connector
Analog Record Out connector: Connect this analog audio output to the analog
audio input of a recording device. A signal is available at this output whenever an
analog audio source is playing.
HDMI Monitor Out connector: If your TV has an HDMI connector, use an HDMI
cable (not included) to connect it to the AVR's HDMI Monitor Out connector. The
AVR will automatically transcode component and composite video input signals to
the HDMI format (upscaling to as high as 1080p), so you do not need to make any
other connections to your TV from the AVR or from any of your video source devices.
Notes on using the HDMI Monitor Out connector:
• When connecting a DVI-equipped display to the HDMI Monitor Out connector,
use an HDMI-to-DVI adapter and make a separate audio connection.
• Make sure the HDMI-equipped display is HDCP (High-bandwidth Digital Content
Protection)-compliant. If it isn't, do not connect it via an HDMI connection; use an
analog video connection instead and make a separate audio connection.
Composite
Composite
Video Input
Video Input
Connectors Connectors
Digital Audio
Digital Audio
Input Connectors
Input Connectors
HDMI Input
HDMI Input
Connectors
Connectors
Optical
Optical
Digital Output
Digital Output
Connector Connector
Analog Audio
Analog Audio
Input Connectors Input Connectors
Rear-Panel Connectors (AVR 3650 shown)
Composite
Composite
Video Monitor
Video Monitor
Out Connector Out Connector
Composite
Composite
Video Record
Video Record
Out Connector
Out Connector
Component
Composite
Video Input
Video Input
Connectors
Connectors
Speaker
Speaker Network Network
Connectors
Connectors Connector
Connector
HDMI Input connectors: An HDMI connection transmits digital audio and video
signals between devices. If your source devices have HDMI connectors, using them
will provide the best possible video and audio performance quality. Since the HDMI
cable carries both digital video and digital audio signals, you do not have to make
any additional audio connections for devices you connect via the HDMI connection.
See Connect Your Audio and Video Source Devices, on page 18, for more information.
Composite Video Input connectors: Use composite video connectors for video
source devices that don't have HDMI or component video connectors. You will also
need to make an audio connection from the source device to the AVR. See Connect
Your Audio and Video Source Devices, on page 18, for more information.
Digital Audio Input connectors: If your non-HDMI source devices have digital
outputs, connect them to the AVR's digital audio connectors. NOTE: Make only one
type of digital connection (HDMI, optical or coaxial) from each device. See Connect
Your Audio and Video Source Devices, on page 18, for more information.
8
Rear-Panel Connectors
®
SIRIUS Tuner
SIRIUS ® Tuner
Connector Connector
(AVR 3650/AVR 2650)
(AVR 3650/AVR 2650)
12V
12V
Trigger
Trigger
Connector
Connector
Zone 2 IR In
Zone 2 IR In
Connector
Connector
(AVR 3650/AVR 365) (AVR 3650/AVR365)
AC Input AC Input
Connector
Connector
Main Power RS-232 RS-232
Main Power
Switch Switch Connector Connector
harman/kardon
The Bridge IIIP
The Bridge IIIP
Connector Connector
IR Remote IR Remote
In/Out Connectors
In/Out Connectors
(AVR 3650/AVR 365)
(AVR 3650/AVR365)
Fan Fan
Vents Vents
Continued on next page