Storing And Recalling Broadcast Frequencies; Setting The Announcement Support Interruption - Pioneer AVH-P6500DVD Operation Manual

Av receiver/dvd player with 6.5 inch wide display
Hide thumbs Also See for AVH-P6500DVD:
Table of Contents

Advertisement

DAB tuner
Note
With a service component that has no service
component lavel, dynamic label or PTY label,
switching to Component, DLS and PTY is not
possible.
Storing and recalling
broadcast frequencies
% When you find a service that you want
to store in memory keep touching a preset
tuning key P 1P 6 until the preset num-
ber stops flashing.
The number you have touched will flash in the
preset number indicator and then remain lit.
The selected service has been stored in mem-
ory.
The next time you touch the same preset tun-
ing key P 1P 6 the service is recalled from
memory.
# When the touch panel keys are not displayed,
you can display them by touching the screen.
# When P 1P 6 are not displayed, you can dis-
play them by touching DISP.
Notes
! Up to 18 services, 6 for each of the three
bands can be stored in memory.
! You can also use a and b to recall services
assigned to preset tuning keys P 1P 6.
! You can also perform the same operations
using P. CH MEMO. To display P. CH MEMO,
touch A.MENU and then touch
FUNCTION.
Setting the announcement
support interruption
1
Touch A.MENU and FUNCTION and then
touch AS.
2
Touch a or b to select the desired an-
nouncement support.
Touch a to select ANNOUNCE (announce-
ment). Touch b to select WEATHER (area
weather flash).
3
Touch d to turn the selected announce-
ment support interruption on.
# To turn the selected announcement support
interruption off, touch c.
Receiving the road traffic flash
and transport flash
1
Press TA/NEWS to turn road traffic
flash and transport flash on.
dTRFC or T appears in the display.
# To turn the road traffic flash and transport
flash off, press TA/NEWS again.
2
Press TA/NEWS while the road traffic
flash and transport flash are being received
to cancel the announcement interruption.
Receiving news flash
% Press TA/NEWS and hold to turn news
flash on.
Press TA/NEWS until dNEWS or N appears in
the display.
# To turn news flash off, press TA/NEWS and
hold again.
Section
12
59
En

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents