Error Messages - Fireco Dorgard Operating Manual

Error Messages

Beep / Flash Sequence
During Power up
LoHi-LoHi-LoHi
Long Tone
Lo – Lo – Lo
Hi – Lo – Lo
Lo – Hi – Lo
Hi – Hi – Lo
Lo – Lo – Hi
Hi – Lo – Hi
Lo – Hi – Hi
Hi – Hi – Hi
During standard operation
* *
---(32secs)--- ---(32secs)---
* * *
-(1.3secs)- -(1.3secs)-
HiLo – HiLo – HiLo – HiLo – HiLo – HiLo – HiLo – HiLo
* * * *
------- ------- ------- -------
*
LED flash
Lo – Low Tone
Hi – High Tone
* *
---(32secs)--- ---etc.
* *
-(1.3secs)- -(1.3secs)- -etc
* * * *
------- ------- -------
14
What it means
Indicates Battery Lift is open
during power up
Indicates start of power up test
No Dip Switch has been selected
Dip Switch 1 has been selected
Dip Switch 2 has been selected
Dip Switches 1 and 2
have been selected
Dip Switch 3 has been selected
Dip Switches 1 and 3
have been selected
Dip Switches 2 and 3
have been selected
Dip Switches 1, 2 and 3
have been selected
Dip Switch 4 has no function and
will not affect beep sequence
LED indicates that the system is
working properly
LED indicates that the Dorgard
is "hearing" a possible alarm (or a please refer to the
continuous background noise
in excess of 65 decibels)
Dorgard is about to release door
(If warning tone has been
disabled – then no tone will sound)
What to do
No action required
No action required
No action required
No action required
No action required
No action required
No action required
No action required
No action required
No action required
No action required
If no alarm is sounding
section on adjusting
the sensitivity of
Dorgard.
No action required