Volvo S60 2017 Owner's Manual page 117

Trip computer heading in combined instrument panel
Distance to empty
Fuel consumption
Average speed
No trip computer information.
Resetting the trip computer
1. Turn the thumbwheel and stop at the trip
computer heading to be reset:
dist. , T2 and total dist. or Average speed
2. One long press on RESET resets the value
for the selected heading.
Each heading must be zeroed individually.
Functions
Digital speed
•
km/h
•
mph
•
No display
Parking heater *
•
DIRECT START
•
- Timer 1 - leads to the menu for selecting time.
•
- Timer 2 - leads to the menu for selecting time.
Information
For more information - see the section "Range - distance to empty tank" (p. 112).
Current consumption.
•
This option shows a blank display and it also indicates the beginning/end of the loop.
Functions in the combined instrument
panel's menu
T1 and total
The combined instrument panel's menu includes
.
setting options for trip computer. Open the menu
to check/adjust the functions in the table below.
1. To ensure that no control is in the middle of
a sequence - reset them first with
two presses on RESET.
Information
Shows the car's speed digitally in the centre of the combined instrument panel.
For a description of programming the timer, see Engine block heater and passenger com-
partment heater* - timer (p. 138).
Long press on RESET resets Average speed
INSTRUMENTS AND CONTROLS
.
2. Press OK.
3. Browse through the functions with the
thumbwheel and select/confirm with OK.
4. Finish by pressing twice on RESET after
completed checking/adjustment.
* Option/accessory, for more information, see Introduction.
}}
115