Supported Operating Systems
Remote Shutdown Agents are available for the following operating systems:
Windows
Linux
Unix
Novell Netware
Shutdown Agent Installation
Windows
1.
Browse to the location of the Remote Shutdown Agent install files.
2.
Run Setup.exe by double-clicking on the icon.
3.
Reply to the standard installation prompts.
4.
For additional security, when prompted enter the IP address of the PDU that will be sending the shutdown
signal.
NOTE: If left blank, any PDU can send a shutdown signal to the server.
Linux
1.
Browse to the location of the Remote Shutdown Agent install files.
2.
Run SetupRA.
3.
For additional security, when prompted enter the IP address of the PDU that will be sending the shutdown
signal.
NOTE: If left blank, any PDU can send a shutdown signal to the server.
Unix
1.
Browse to the location of the Remote Shutdown Agent install files.
2.
Run Install.
3.
For additional security, when prompted enter the IP address of the PDU that will be sending the shutdown
signal.
NOTE: If left blank, any PDU device may send a shutdown signal to the server.
Netware
1.
Browse to the location of the Remote Shutdown Agent install files.
2.
From the NetWare system console, load the configuration module (pmconfig.nlm) using the default path.
3.
For additional security, when prompted, enter the IP address of the PDU that will be sending the shutdown
signal.
NOTE: If left blank, any PDU can send a shutdown signal to the server.
144 Advanced Operations
2000, 2003, XP
Red Hat 7.3, 8.0
Red Hat Enterprise 2.1 ES (update 5), 3.0 ES (update 4)
Novell SUSE Linux Enterprise Server
HP-UX 11.0, 11i v1, 11i v2
IBM AIX 4.3, 5.3
Sun Solaris 8, 9, 10
6
Switched PDU
Installation and Operations Manual
Need help?
Do you have a question about the Switched Rack PDU and is the answer not in the manual?