Changing The Door Hinging - Miele K 9122 Ui Operating And Installation Instructions

Before building the appliance in, you
will need to decide on which side the
door is to be hinged. If left hand hinging
is required, follow the instructions
below.
To change the door hinging, you will
need the following tools:

Changing the door hinging

Appliance door
 Open the appliance door.
 Remove covers ,  and  with a
screwdriver.
 Loosen fixing screws  slightly.
 Push the appliance door outwards,
take it off its hinges  and place it to
one side.
 Now remove fixing screws 
completely and screw them loosely
into position at the top  and
bottom  on the opposite side.
Use a power screwdriver to secure
the hinges. The screws are self-
tapping.
If you have put locking pins into the
hinges to stop the door opening too far:
47