Replacing The Led Lamp - Miele K 9122 Ui Operating And Installation Instructions

Problem solving guide

Replacing the LED lamp

Danger of injury from LED lighting.
Light intensity corresponds to laser
beam class 1/1M.
Danger of injury to eyes if the lamp
cover is damaged or if it has been
removed.
Do not look into the LED lighting
(laser beam class 1/1M) with optical
instruments (e.g. magnifying glass or
similar).
Fire hazard.
Only use a genuine Miele original
LED lamp. Do not use similar LED
lamps from other sources.
LED lamps are available from Miele or
from your Miele dealer.
The following lamps, available from
Miele, are suitable: 220 – 240 V, max.
15 W, E 14.
 Disconnect the appliance from the
mains. Switch off at the wall and
withdraw the plug from the socket, or
switch off at the mains fuse board.
 Grasp the lamp cover at the top and
bottom (1) and then pull it forwards to
remove it (2).
38
 Fit the new LED lamp.
 Replace the lamp cover and click it
into place at the sides.