Cisco MDS 9000 Configuration Manual page 46

Creating Zone Sets
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 5-7
Step 6 After creating a zone set, you must activate it to take effect. Click a zone set to activate it or right-click
the zone set and select Activate (see
in the network fabric.
Note
Figure 5-8
After creating a zone set and activating it, make sure you save the configuration file. See
"Configuration Files,"
Cisco MDS 9000 Family Fabric Manager Quick Configuration Guide
5-6
Zone 2 has been dragged to Zone Set 4
When you confirm the activate operation, the current running configuration is saved to the
startup configuration. This permanently saves any changes made to the running configuration
(not just zoning changes).
Activation
for details about copying and saving configuration files.
Figure 5-8). This configuration is distributed to the other switches
Chapter 5 Configuring Zones and Zone Sets
Appendix C,
OL-7765-02