Optimizing An Rgb Image Automatically - NEC wt610 Setup Manual

Optimizing an RGB Image Automatically

Adjusting the Image Using Auto Adjust
Optimizing an RGB image automatically.
Press the Auto Adjust button to optimize an RGB image automatically.
[Poor picture]
[Normal picture]
Press the Auto Adjust button to fine-tune the computer image or to remove any vertical banding that might appear and
to reduce video noise, dot interference or cross talk (this is evident when part of your image appears to be shimmer-
ing). This function adjusts the clock frequencies that eliminate the horizontal banding in the image. This function also
adjusts the clock phase to reduce video noise, dot interference or cross talk.
This adjustment may be necessary when you connect your computer for the first time.
NOTE:
• Some signals may take time or not be displayed correctly
• The Auto Adjust function does not work for component or video signals.
• If the Auto Adjust operation cannot optimize the RGB signal, try to adjust Clock and Phase manually.
SELECT
VIDEO
ASPECT
ENTER EXIT
PIC-MUTE
3D
REFORM
VOLUME
AUTO
ADJUST
POWER
FREEZE
ON/ STATUS
STAND BY
LAMP
E-14
COMPUTER VIEWER
AUTO ADJ. SLIDE
HELP
FOCUS ZOOM
3D REFORM