...4 CONFIGURATION MODE
4.4 Ranges and Passwords (Level 4)
LEVEL4
ENG HI
100. 0
ENG LO
CNt HI
•1 The engineering range high and low values are automatically set to the maximum
allowed value when thermocouple or RTD is selected in the configuration level –
see Section 4.3.1. This value can be modified if required.
28
Level 4
Note. To select to this frame from anywhere in
this level, press the
Engineering (Display) Range
High Value
•1
Low Value
•1
0. 0
Continued on next page...
key for a few seconds.
[–9999 to 99999]
[–9999 to 99999]