Troubleshooting Guide - Canon EOS Rebel XS Instruction Manual

Troubleshooting Guide
No images can be shot or recorded.
_ The card is not properly inserted. (p.31)
¢ If the card is full, replace the card or delete unnecessary images to
make room. (p31, 130)
¢ If you try to focus in the One-Shot AF mode while the focus
confirmation Hght <0> in the vievdinder blinks, a picture cannot be
taken Press the shutter button halfway again to focus, or focus
manually (p.37, 62)
Slide the card's wdte-protect switch to the Write/Erase setting. (p31)
The LCD monitor does not display a c{ear image.
_ If dust is adhedng to the LCD monitor, wipe with a lens cloth or soft
c_oth.
In low or high temperatures, the LCD monitor display may seem slow
or it might look black. It will return to norma$ at room temperature.
The image is out of focus.
_ Set the lens focus mode switch to <AF> (p.33)
To prevent camera shake, hold the camera still and press the shutter
button gently. (p.36, 37)
The card cannot be used=
if a card error message is displayed, see page 40 or 175
The camera makes a noise when it is shaken.
_ The bui}tdn flash's pop-up mechanism moves slightly. This is normal
173