Panasonic ER-CA35 Operating Instructions Manual page 4

Parts identification
A Blade
B Attachment mounting
C Switch
D Charging indicator lamp
E 1/8" / 1/4" (3/6mm) comb
attachment
F 3/8" / 1/" (9/1mm) comb
attachment
G 0.8" / 1." / 1.6" (0/30/40mm)
comb attachment
H Lever for cleaning
I AC adaptor (RE9‑45)
J Power cord
K Oil
L Cleaning brush
Charging
1. Set the switch 2. Connect the AC
to "0•CHARGE", adaptor into an
and insert the outlet. The
power cord into charging
the clipper. indicator lamp
will light up.
4
• The charging time is 8 hours.
• 1 full charge will provide approximately 40 minutes of continuous
operation.
• If the shape of the plug does not fit the power outlet, use an



attachment plug adaptor of the proper configuration.




►
0.8" / 1.2" / 1.6" (20/30/40mm) comb attachment


1. Adjust the attachment to the desired

trimming height by sliding it until it


clicks while the switch is in
"0•CHARGE".
•
•
►
1/8" / 1/4" (3/6mm), 3/8" / 1/2" (9/12mm) comb
attachments
1/8" / 1/4"
1. Select the
cutting heights
indicated on the
insides and
3. Disconnect the
sides of the
AC adaptor
attachments.
from an outlet
when charging
is completed.
Inserting the attachment
Set the attachment to the correct position.
Otherwise you cannot set the switch to "1".
Actual hair length will be a little longer than
the height you set.
1/4"
1/8"
3/8"
1/2"
3/8" / 1/2"
2. Mount the
attachment to
the clipper as
illustrated.
3. Remove the
attachment
from the clipper.