Table of Contents
Advertisement
Important care information
for stainless steel
appliances
Use Chromol" cleaning agent for
cleaning stainless steel surfaces.
This cleaning agent is available on the
market under the name Chromol" or from
your customer service under
ident no. 310359 as a 500 ml spray can
or under
ident no. 166787 as a 50 ml trial can.
To prevent damage to the surfaces, under
no circumstances use abrasive sponges,
metal brushes, sharp edged implements
or scouring agents. Chemically aggressive
cleaning agents, such as defrosting
sprays, oven sprays, solvents or stain
removers must not be used either.
The stainless steel surface should be
cleaned in the direction of the grain.
How to save energy
S The freezer should be installed in a dry,
well ventilated room, not exposed to
direct sunlight and not placed near
a heat source (radiator, etc.).
S Do not block the ventilation openings
in the appliance.
S Allow warm food to cool down before
placing it in the freezer.
S Thaw frozen food by placing it in the
refrigerator. The low temperature of
the frozen food cools the food in the
refrigerator.
S Defrost the appliance when ice forms.
A thick layer of ice impairs refrigeration
of the frozen food and increases the
power consumption.
S When loading or unloading the freezer,
open the appliance door as briefly as
possible.
The briefer the appliance door is
opened, the lower the ice formation
on the freezer shelves.
S To prevent the food from warming up
quickly in the event of a power failure
or malfunction, take ice blocks from the
freezer tray and place them in the top
compartment directly on the food.
en
27
Advertisement
Table of Contents
