Panasonic TX-26LX1F Operating Instructions Manual page 6

Quick Start Guide
3
Land
Start ATP Suchlauf
CH12
AUTO SETUP IN PROGRESS
SEARCHING :
02
EXIT : To exit
4
Once Auto setup is complete, if you are installing a new Q-Link compatible recording device, you can now
switch it On. Downloaded tuning data will match the television's. Not all devices support this download of
programme information, some may require to be started manually. See the device's instruction book for
details.
• If the recording device has not accepted download data from the TV, you may need to select the download
option from the device's menu.
• If Q-Link is not operating correctly, check it is connected to the TV's correct Scart terminal, the Scart
cable is a "full function" type, and the device is compatible with Q-Link, NEXTVIEWLINK or similar
technologies.
Ask your dealer for further details.
• For further information on Q-Link and connecting equipment. See page 17, 32.
5
We recommend that as soon as the Auto setup feature is completed, the
picture controls are reset to normal viewing levels. To do this, press the N
button.
6
Select your country.
For Belgium, Switzerland and E.Eu,
select the desired language.
If you wish to perform manual tuning,
press the Green button.
See page 16.
Abbruch
Press the Red button to start Auto
Setup.
Auto setup will begin, your stations will
be located and stored.
PLEASE WAIT
78:01 41
If a compatible recording device is
connected to the correct Scart
terminal, programme data will be
downloaded to the device via Q-Link.
See page 17.
OK
Green
N
1 2 3
4 5 6
7 8 9
Red
C 0
TV
N
OK
N
1 2 3
4 5 6
7 8 9
0
C
TV