Tuning Menu - Manual Tuning; Manual Tuning (Via Front Panel) - Panasonic TX-26LX1F Operating Instructions Manual

Tuning menu – Manual tuning
It is possible to retune individual programme positions:
Press the MENU button.
Move to choose Setup menu.
Access Setup menu.
Move to choose Tuning menu.
Access Tuning menu.
Move to choose Manual tuning.
Access Manual tuning.
Select the programme position to be tuned.
Press repeatedly until required station is found.
When the desired station is found, press the OK button to
store.
The programme position will flash.
Press the EXIT button at any time to go back to
watching TV.
Note:
When using a VCR without video and audio input / output terminals, it is convenient to connect the antenna
cable as indicated in the instruction book of VCR and to set the designated channel to programme No."0". In
that case, perform Manual tuning after setting the Colour system in advance. Further, in multi-system VCR, it
is more convenient to set the designated channel to several programme numbers.

Manual tuning (via front panel)

It is also possible to use the control panel buttons on the front of your TV to tune individual programme positions:
Press the F button until Tuning mode is reached.
Press the –/ or +/ button to access Tuning mode.
Press the TV/AV button to move between Change
programme, Search and Change TV system.
Press the –/
position or start search.
When the desired station is found, press the STR
button to store.
The programme position will flash.
Repeat above procedure to tune additional
programme positions.
Press the F button at any time to go back to watching
TV.
16
or +/ button to change programme
MENU
1
CH12
OK
Programme
down/up
EXIT
Manual tuning
02
1
CH12
SC1
Manual tuning
-, + : Search
TV / AV : Move cursor
STR : To store
F : To exit
02
STR F
OK
N
1 2 3
4 5 6
7 8 9
0
C
TV
Search
Store
down/up
Return Exit
78:01 41
78:01 41
- / + / TV / AV