Disclaimer Notice - Toshiba e-studio 180s User Manual

January 1, 1996
: Council Directive 89/336/EEC (92/31/EEC),
approximation of the laws of the Member States related to electromagnetic
compatibility.
March 9, 1999
: Council Directive 1999/5/EC on radio equipment and
telecommunications terminal equipment and the mutual recognition of their
conformity.
CE marking is the responsibility of TOSHIBA TEC GERMANY IMAGING
SYSTEMS GmbH, Carl-Schurz-Str. 7, 41460 Neuss, Germany, phone +49-
(0)-2131-1245-0.
For a copy of the related CE Declaration of Conformity please contact your
dealer or TOSHIBA TEC.
Replacing the Fitted Plug (for UK Only)
I
MPORTANT
The mains lead for this machine is fitted with a standard (BS 1363) 13 amp
plug and has a 13 amp fuse. When you change or examine the fuse, you
must re-fit the correct 13 amp fuse. You then need to replace the fuse cover.
If you have lost the fuse cover, do not use the plug until you have another
fuse cover.
Please contact the people from you purchased the machine.
The 13 amp plug is the most widely used type in the UK and should be
suitable. However, some buildings (mainly old ones) do not have normal 13
amp plug sockets. You need to buy a suitable plug adaptor. Do not remove
the moulded plug.
W
ARNING
If you cut off the moulded plug, get rid of it straight away.
You cannot rewire the plug and you may receive an electric
shock if you plug it into a socket.
: You must earth this machine.
I
MPORTANT WARNING
The wires in the mains lead have the following color code:
• Green and Yellow: Earth
• Blue: Neutral
• Brown: Live
If the wires in the mains lead do not match the colors marked in your plug,
do the following:
You must connect the green and yellow wire to the pin marked by the letter
"E" or by the safety 'Earth symbol' or colored green and yellow or green.
You must connect the blue wire to the pin which is marked with the letter "N"
or colored black.
You must connect the brown wire to the pin which is marked with the letter
"L" or colored red.
You must have a 13 amp fuse in the plug, adaptor, or at the distribution
board.

Disclaimer Notice

The following notice sets out the exclusions and limitations of liability of
TOSHIBA TEC CORPORATION (including its employees, agents and sub-
contractors) to any purchaser or user ('User') of the e-STUDIO180S,
including its accessories, options and bundled software ('Product').
1. The exclusion and limitations of liability referred to in this notice shall be
effective to the fullest extent permissible at law. For the avoidance of
doubt, nothing in this notice shall be taken to exclude or limit TOSHIBA
TEC CORPORATION's liability for death or personal injury caused by
TOSHIBA TEC CORPORATION's negligence or TOSHIBA TEC
CORPORATION's fraudulent misrepresentation.
2. All warranties, conditions and other terms implied by law are, to the
fullest extent permitted by law, excluded and no such implied warranties
are given or apply in relation to the Products.
3. TOSHIBA TEC CORPORATION shall not be liable for any loss, cost,
expense, claim or damage whatsoever caused by any of the following:
(a) use or handling of the Product otherwise than in accordance with the
manuals, including but not limited to Operator's Manual, User's Guide,
and/or incorrect or careless handling or use of the Product;
(b) any cause which prevents the Product from operating or functioning
correctly which arises from or is attributable to either acts, omissions,
events or accidents beyond the reasonable control of TOSHIBA TEC
CORPORATION including without limitation acts of God, war, riot, civil
commotion, malicious or deliberate damage, fire, flood, or storm,
natural calamity, earthquakes, abnormal voltage or other disasters;
(c) additions, modifications, disassembly, transportation, or repairs by
any person other than service technicians authorized by TOSHIBA TEC
CORPORATION; or
(d) use of paper, supplies or parts other than those recommended by
TOSHIBA TEC CORPORATION.
4. Subject to paragraph 1, TOSHIBA TEC CORPORATION shall not be liable
to Customer for:
(a) loss of profits; loss of sales or turnover; loss of or damage to
reputation; loss of production; loss of anticipated savings; loss of
goodwill or business opportunities; loss of customers; loss of, or loss of
use of, any software or data; loss under or in relation to any contract;
or
(b) any special, incidental, consequential or indirect loss or damage,
costs, expenses, financial loss or claims for consequential
compensation;
whatsoever and howsoever caused which arise out of or in connection
with the Product or the use or handling of the Product even if TOSHIBA
TEC CORPORATION is advised of the possibility of such damages.
TOSHIBA TEC CORPORATION shall not be liable for any loss, cost,
expense, claim or damage caused by any inability to use (including, but
not limited to failure, malfunction, hang-up, virus infection or other
problems) which arises from use of the Product with hardware, goods or
software which TOSHIBA TEC CORPORATION has not directly or
indirectly supplied.
6