Sweep
Press the
menu is used to define the frequency, amplitude, and dwell
time information for step sweep or list sweep.
Sweep State
Step Scaling
Sweep Type
Sweep Repeat
Single/Cont
Step Sweep
accesses a menu of softkeys. The softkey
Sweep
Enters sweep state submenu:
Off
RF
LF
Ampl
RF& Ampl
Toggles step scale between logarithm and linear
LOG/LIN
Toggles sweep type between step and list
Step/List
Toggles sweep repeat between single and continuous
Enters step sweep configuration submenu:
RF Start
RF Stop
LF Start
LF Stop
# Point
Disables a sweep
Enables radio frequency sweep mode
Enables low frequency sweep mode
Enables amplitude sweep mode
Enables RF&Ampl sweep mode
Sets RF sweep start frequency
Sets RF sweep stop frequency
Sets LF sweep start frequency
Sets LF sweep stop frequency
Sets sweep points
Continued
Key Reference
73