Operating Information; Safety Instructions; List Of Accessories - Weller WFE P Operating Instructions Manual

Before the new main filter cartridge is fitted it should be marked with the date of
installation. The unit should be installed in reverse sequence.
Warning:When inserting filters, take care to follow the correct sequence and fit
them in the appropriate position. The soiled filters must be treated as hazardous
waste and must be disposed of in accordance with Waste Code 31435 or local
regulations.

3. Operating information

The pump casing (2) simultaneously acts as a heat sink and consequently heats up.
Excessive heating is prevented by a built-in thermal cut-out.
The WFE-P soldering fume extraction unit is not suitable for the extraction of flammable
gases.

4. Safety instructions

The manufacturer accepts no liability for usage other than that specified in the operating
instructions, nor for any unauthorised modifications.
These operating instructions and the warning information they contain should be read
carefully and kept in a clearly visible place adjacent to the soldering unit. Failure to
adhere to warning information could cause accidents and injuries or be detrimental to
health.
The WELLER WFE-P soldering fume extraction unit complies with the EC certificate of
conformity in accordance with the basic safety standards of EC guidelines 89/336/EEC,
73/23/EEC and 89/392/EEC.
5. List of accessories (Europe only)
52616299 FE 80 soldering bit 80W
52515399 FE 50 soldering bit 50W
53215299 FE 50M Magnastat soldering bit 50W
52910699 FE 25 soldering bit 25W
52910799 MLR-21 FE micro soldering bit 25W
52512599 FE retrofit kit for LR-21, LR-82, TCP-S
52912570 FE retrofit kit for MLR-21
51312599 FE retrofit kit for DS-22, DS-80
51503099 AK-20 rest for soldering bit with FE add-on
51507699 KHE stop-and-go rest
5.1. List of accessories (USA only)
EC1002-1FE Station, Dial Controlled
EC2002M-FE Station, Digital
WTCPTFE Station, Magnastat
EC1201FE Iron, 42 Watt for EC1002-FE & EC2002M-FE
TC201FE Iron, Magnastat 42 Watt for WTCP Stations
AKFE_ Adapter Kits available for other brand irons, contact Customer Service
RT-FE WF1026 Tubing Clear Regular 7 foot Replacement for Irons
WF1026 Tubing, ESD Replacement for Irons
Fume Adaptor Kits
AKFE1-1 Weller: EC1201A, TC201T, WCC100, WTL120, W60P, W100P,
WP25P, WP40P, SP23, SP40, SP80, SPG80, WLC100, WLC200
Pace: IR-70
Hexacon: 1002PBS, 1002, HTC5500, HTC5600
Ungar: UTC100, UTC300, 9931AS, 9931HC
AKFE2 Hakko: 900M, 900L Series Irons,
AKFE3 Weller: WP25, WP30, WP35
Jensen: 47B723
AKFE4 Ungar: SL325, SL335, SL345, SL500, 7400, 7500, 5550, 555XR,
555XT Soldering Irons, 2110 Soldering Station
AKFE5 Edsyn: 930 Series Iron
AKFE6 Ungar: 9911AS, 9911 HC, 9941 AS, UTC200, and 9300 Series
Soldering Irons
AKFE7 Ungar: 40S-MOD, 60S-MOD
AKFE8 Ungar: 100S-MOD
20