Table of Contents
Advertisement
Tuning
AUTO TUNE
Auto tuning automatically retunes your TV. This feature is useful if, e.g., you move house and wish to retune your
TV to receive the local stations.
Press the MENU button.
Move to choose SETUP.
Access SETUP.
Move to choose TUNING MENU.
Access TUNING MENU.
Move to choose AUTO TUNE.
Access AUTO TUNE.
Notes:
• If you proceed with the next step all tuning data will be erased (all stations and their programme
positions stored in your TV's memory will be wiped out so the new settings can be stored).
• If you exit the procedure after this point and before AUTO TUNE is complete, no station information
will be stored. Restart and complete the AUTO TUNE procedure so that the TV is retuned.
Press to start AUTO TUNE.
The TV will search for, locate, store and then sort into
order your local stations.
Once this operation is completed the TV will display the
programme now stored on programme position 1.
Press the TV/AV button at any time to go back to watching
TV (please read the Notes in the above procedure).
AUTO TUNE (via top panel)
It is also possible to use the control panel buttons on the top of the TV to tune individual programme positions:
Press F until TUNING MODE is reached.
Press –/
or +/
to access TUNING MODE.
Press F until AUTO TUNE is reached.
Press –/
or +/
to start search.
Press TV/AV at any time to exit the TUNING MENU.
Notes:
• If a clear picture with correct colours cannot be obtained when a Broadcast or AV signal is received, refer to the
COLOUR SYS selection on page 12.
• After the AUTO TUNE is finished, press the Programme Number up button to confirm the tuning condition for
each Programme Number. If some Programme Numbers are unused, it is possible to skip such Programme
Numbers. Please refer to the SKIP function on page 12.
14
MENU
Example: TX-20LB30M
12
CH 12
AUTO SETUP IN PROGRESS
SEARCHING :
TV/AV
STORED
MENU
: RETURN
TV/AV
: TO EXIT
STR
OK
1
2
3
4
5
6
7
8
9
0
TV
PLEASE WAIT
CH 12
F
TV/AV
Advertisement
Table of Contents
