Panasonic TQBC2206 Operating Instructions Manual page 17

VIERA Link "
∗Enjoy additional HDMI Inter-Operability with Panasonic products which have "HDAVI Control" function.
This TV supports "HDAVI Control 2" function.
Connections to some Panasonic equipment (DVD Recorder DIGA, HD Video Camera, Player theatre,
Amplifi er, etc.) with HDMI cables allow you to interface them automatically.
The equipment with "HDAVI Control" function enables the following operations:
•
• Easy playback (p. 33)
Power on Link (p. 33)
•
Power off Link (p. 33)
•
Speaker control (p. 33)
In addition, the equipment with "HDAVI Control 2" function enables the following operation:
•
Easy control only with VIERA remote control (p. 33)
These features are limited to models incorporating Panasonic's "HDAVI Control" and "VIERA Link".
VIERA Link "HDAVI Control", based on the control functions provided by HDMI which is an industry
standard known as HDMI CEC (Consumer Electronics Control), is a unique function that we have
developed and added. As such, its operation with other manufacturers' equipment that supports HDMI
CEC cannot be guaranteed.
Refer to individual manuals for compatibility information. About applicable equipment, consult your local
Panasonic dealer.
■
HDMI cable
This function needs an HDMI compliant (fully wired) cable. Non-HDMI-compliant cables cannot be utilized.
It is recommended that you use Panasonic's HDMI cable. Recommended part number:
•
• RP-CDHG15 (1.5 m)
RP-CDHG30 (3.0 m)
•
RP-CDHG50 (5.0 m)
■
Preparations
Setup the equipment to enable this function. Read the manuals of the equipment.
About connections, see "External Equipment" (p. 35). Read the manuals of the equipment too.
■
For the fi rst time / When adding new equipment, reconnecting equipment or changing setup
After connection turn the equipment on and then switch the TV on.
Select the input mode to HDMI1, HDMI2 or HDMI3 (p. 14), and make sure that an image is
displayed correctly.
1 Display the menu
POWER
INPUT
MULTI PIP OPTION SD CARD
ASPECT EXIT
Select "Setup"
2
VIERA Link
RETURN
Picture
Sound
R G Y B
Setup
Select "VIERA Link Settings"
F.P. 3
Setup Menu
Banner Display Timeout
VIERA Link Settings
SD Card LED
Region Select
Daylight Saving Time
Refresh Rate
Software Licence
System Information
RECALL MUTE
4 Select "VIERA Link"
and set to "On"
CH VOL
VIERA Link Settings
VIERA Link
Power off Link
32
Power on Link
Control
Main Menu
2/2
3 seconds
Access
On
NSW / ACT
Auto
100Hz
On
Set
Set
"∗
TM
Easy
control
only with
VIERA
remote
control
Easy
playback
Speaker
access
control
select
access
Power on
select
Link
Power off
Link
•
set
The TV remains on even if the "VIERA Link" compatible equipment is turned off.
select
•
You can control some functions of the Available VIERA remote control buttons:
connected Panasonic equipment with (depending on the connected equipment)
this TV remote control (point the remote
control at the TV's signal receiver).
•
If you cannot access the menu, check the
settings and the equipment (p. 32).
Access the menu of the equipment
Display "VIERA Link Menu"
Select "VIERA Link Control"
VIERA Link Menu
VIERA Link Control Recorder
Speaker Selection Home Cinema
select
Select the
select
equipment you
want to access
access
Operate the menu of the equipment
•
Example:
DVD Recorder DIGA HD Video Camera
ALL
FUNCTION MENU
HDD
Playback
Recording
Delete
Copy 8 / 8
• To Others DATE/TIME 2006.12. 1 10:46
About the operations for the equipment, read the manual of the equipment.
Automatic Input switching-When the connected Panasonic equipment is operated, input
mode is switched automatically. When it is stopped operating, input mode is not returned.
You can control the theatre speaker with TV's remote control.
This function is available when Panasonic Amplifi er or Player theatre is connected.
•
■
If you cannot access the menu, check the
settings and the equipment (p. 32).
Display "VIERA Link Menu"
Select "Speaker Selection"
VIERA Link Menu
VIERA Link Control Recorder
Speaker Selection Home Cinema
select
Set to "Home Cinema"
or "TV"
■
set
Set to "Set"
When the connected Panasonic equipment starts playback or direct navigator /
function menu for the equipment are activated, the TV is automatically turned on.
(Only when TV is in Standby mode.)
Set to "Set"
When TV is set to Standby mode, the connected Panasonic equipment is also
automatically set to Standby.
•
This function will work even if the TV enters standby mode automatically by Off Timer
function or auto power standby function.
Move the cursor /
select the menu
Move the cursor / access /
adjust
Store / set / access
Return to the previous
RETURN
menu
EXIT
Exit the menu
The same functions with
OPTION
the OPTION button of the
equipment
Access when the key words
R G Y B
are displayed on colour bar
Player theatre
Start
Listen
Watch
Import/Record
Setup
Home Cinema
Adjustment for equipment
(automatically turned on if it is in
Standby mode).
Volume up / down
VOL
Mute
•
MUTE
The sound of TV speakers is mute.
•
When the equipment is turned off,
TV speakers will be active.
TV
TV speakers are active.
33