Multi Piper Setup - Piper nv User Manual

Multi Piper Setup

To set up additional Pipers on a network using the same account, please follow the steps
below. iOS and Android devices follow separate instructions after the physical installation of
your Piper.
Note: The initial piper must be set up before additional Pipers can be added.
Follow these steps to add an additional Piper to your network:
1.
8. Remove Piper from its
detachable stand.
9.
4.
10.
Re-attach the stand (or affix the optional
wall mount) and position your Piper in the
desired location. For optimal viewing
capacity, we recommend placing Piper
in a high traffic area.
Piper User Manual
2.
11. Open the battery door located at the
back of Piper and insert the provided
AA batteries. Close the battery door
and secure it with the provided screw.
5.
12.
Press the power button on the back
of Piper, located on the bottom-right.
Piper's LED light will be yellow
while starting up.
3.
13. Connect the power cable to Piper
and plug the opposite end to an
electrical outlet.
14.
17