Panasonic TH-58PX25 Operating Instructions Manual page 8

Accessories/Options
2
Setting-up
Television unit
Label
3
Stopping the plasma television from falling over
* The plasma TV must be fastened to both the base and the wall.
Accessories for pedestal security
1 Band (2)
Securing to a base
Front
Front
Wood Worktop
Fasten with wood screws in the holes in the
back edge of the wood worktop. If there are
no holes, first drill them in the middle of the
thickness of the wood worktop, and then
fasten the strap with wood screws.
8
* Carry out work on
a horizontal and
level surface.
B
B
Rear
Pedestal
For 37'', 42'', 50'' Plasma television
2 Screw (2)
Nominal diameter
4 mm x 12
D
Lift the television unit above the pedestal base,
with the back of the display unit on the same side
as the Label. Then align the holes in the television
unit with the poles of the pedestal and lower the
television unit into place.
Use the assembly screws
securely.
3 Wood screw (2)
Securing to a wall
Screws on main body
Securing method
(M5 x 30) to fasten
B
4 Clamp (2)
* Remove the screws at
both top corners on
the rear side of the
plasma TV, and attach
the clamps 4 to the
plasma TV using the
removed screws.
* Use strong wire
or chain which is
commercially available
to secure the plasma
television to a solid
area of the wall or a
pillar.