Panasonic TH-58PX25 Operating Instructions Manual page 25

Connecting this unit to a DVD recorder and AV amp
When using an "Control with HDMI" audio-video amplifier and a compatible DIGA recorder, use a daisy chain
connection as shown below.
Optic fiber
•
One AV amp and one DIGA can be operated
with this unit.
•
Be sure to connect the AV amp between this
unit and the DIGA.
Setting of this unit after connection
After making connections as shown above, set "Ctrl with HDMI" (under "Other adjust") to "On" using the Setup
menu. (p. 22).
Note
•
Individual HDMI equipment may require additional menu settings specific to each model. Please refer to their
respective operating instruction manuals.
•
When audio from other equipment connected to this unit via HDMI is output using "DIGITAL AUDIO OUT" of this
unit, the system switches to 2CH audio.
(When connecting to an AV amp via HDMI, you can enjoy higher sound quality.)
HDMI cable
Digital audio input
(Optic)
HDMI (AV IN)
Note
•
HDMI 1 is recommended.
When connecting to HDMI 2, set the input mode
to HDMI 2 (p. 19) initially before connecting to
HDMI 2. After connection, confirm the HDMI control
functions (p. 22-23).
HDMI (AV OUT)
Panasonic AV amp
HDMI cable
HDMI (AV OUT)
DIGA (Panasonic DVD Recorder)
25