Displaying PC Screen on TV
The screen of the PC connected to the TV can be displayed on the TV.
You can also listen to PC sound with the audio cable connected. To connect PC (p. 34)
INPUT
OPTION SD CARD
RETURN
■
To return to TV
■
PC menu setting (changed as desired)
•
To make settings
Menu
Advanced
PC
Settings
PC
Setup
•
Other items
28
Select the external input
1
EXIT
Select "PC"
2
Input Selection
AV1
AV2
AV3
AV4
PC
HDMI1
HDMI2
HDMI3
TV
"How to Use Menu Functions"
Item
W/B High R
White balance of bright red area
W/B High B
White balance of bright blue area
W/B Low R
White balance of dark red area
W/B Low B
White balance of dark blue area
Gamma
(2.0 / 2.2 / 2.5 / S Curve)
Reset PC
Press the OK button to reset to the default settings
Settings
Switches to a wide view
•
Input
VGA (640 × 480 pixels), WVGA (852 × 480 pixels),
Resolution
XGA (1,024 × 768 pixels), WXGA (1,366 × 768 pixels)
•
Options change depending on signals
Clock
Set to the minimum level if noise occurs
Adjusts horizontal position
H-pos
Adjusts vertical position
V-pos
Eliminates fl icker and distortion
•
Clock Phase
Adjust after Clock adjustment
PC sync signal type (H & V / On G)
•
Sync
H & V : Horizontal and Vertical sync from your PC (Most common sync format)
On G : Sync on Green sync from your PC
Reset PC
Press the OK button to reset to the default settings
Settings
p. 20 and p. 21
•
•
to
(p. 18)
Adjustments / Confi gurations (options)
access
select
Corresponding signals (p. 39)
If "H-freq." or "V-freq." is shown in red,
the signals may not be supported.
and
repeatedly adjusted
•
Set to the minimum level if noise occurs