Programme Edit - Panasonic Viera TH-58PZ700A Operating Instructions Manual

■
Menu list
Menu Item
DVB Favourites Edit
Auto Tuning
Analogue

Programme Edit

DVB Manual
Tuning
Analogue
Manual Tuning
Add New DVB
Services
New Service
Message
DVB Signal
Display
Off Timer
Teletext
Shipping Condition
System Update
Power Save
Side Panel
Picture Overscan
Input Labels
Banner Display
Timeout
VIERA Link
Power off Link
Power on Link
SD Card LED
Region Select
Daylight Saving Time
Refresh Rate
Software Licence
System Information
•
A different menu will be displayed while PC, DVI to HDMI adapter cable or SD Card is used.
•
Only available items can be selected.
Adjustments / Confi gurations (alternatives)
Creates list of favourite programmes (p. 23)
Automatically sets the channels received in the area (p. 24)
Edits analogue channels (p. 25)
Sets the DVB channels manually (p. 25)
Sets the analogue channels manually (p. 25)
Adds new DVB services (p. 25)
Selects whether to give a notifi cation message when a new DVB service is found (p. 25)
Checks the DVB signal condition (p. 25)
Sets the time the TV automatically turns Off (Off / 15 / 30 / 45 / 60 / 75 / 90 minutes)
Teletext display mode (TOP (FASTEXT) / List) (p. 16)
Resets all settings, for example, when moving house (p. 26)
Downloads new software to TV (p. 23)
Reduces brightness of picture to economise on power consumption (Off / On)
Increases the brightness of the side panel (Off / Low / Mid / High)
•
The recommended setting is "High" to prevent panel "image retention"
Selects the screen area displaying the image (Off / On)
On : Enlarged the image to hide the edge of the image.
Off : Displayed the image in the original size.
•
Set to "On" if noise is generated on the edge of the screen.
•
This function is available when aspect is set to 16:9.
•
1080i or 1080p signal only
Labels or skips each input terminals (p. 27)
Sets how long the information banner (p. 11) stays on screen
•
0 (No display) to 10 sec. in 1-sec. increments
Sets to use VIERA Link functions (Off / On) (p. 32)
Set to "Set" to use Power off Link function (No / Set) (p. 33)
Set to "Set" to use Power on Link function (No / Set) (p. 33)
Lights blue LED while SD Card is inserted (Off / On) (p. 31)
Selects the region where you live to adjust the standard time (NSW/ACT / Victoria /
Queensland / South Australia / Western Australia / Northern Territory / Tasmania)
(p. 23)
Select time offset from the standard time for Summer Time
(Auto / Off / +1/2 Hr / +1 Hr) (p. 23)
•
Set to "Auto" normally
Changes the image processing of the panel (depending on the input signal) (50Hz / 100Hz)
•
Set to "100Hz" normally
Displays the software licence information
Displays the system information of this TV
(p. 28-29 and p. 31)
21