Power On / Off - Panasonic TH-50PF10WK Operating Instructions Manual

Power On / Off

Connecting the AC cord plug to the Plasma Display.
Fix the AC cord plug securely to the Plasma Display
with the clamper. (see page 8, 9)
TH-50PF10WK
Connecting the plug to the Wall Outlet
Notes:
• Main plug types vary between countries. The power plug shown
at right may, therefore, not be the type fi tted to your set.
• When disconnecting the AC cord, be absolutely sure to disconnect
the AC cord plug at the socket outlet fi rst.
Press the Power switch on the Plasma Display to turn the set on:
Power-On.
Power Indicator: Green
Example: The screen below is displayed for a while after the
Plasma Display is turned on (setting condition is an
example).
When the Power is turned on for the fi rst
time, the Language selection screen is
displayed.
From the second time on, language
selection can be done from the setup
menu. (see page 15)
Select the desired language using the
or button and press the ACTION ( )
button.
Note:
Set with the remote control. Buttons on
the main unit are unavailable for this
setting.
TH-65PF10WK
OSD Language
English (UK)
Deutsch
Français
Italiano
Español
ENGLISH (US)
Русский
Select Set
INPUT MENU -/ VOL + / ENTER/
From the second time on, the below
screen is displayed for a while (setting
condition is an example).
Power Indicator
Remote Control
Sensor
PC
16:9
13