Faqs - Panasonic Viera TH-42PX45EH Operating Instructions Manual

FAQs

Before requesting service or assistance, please follow these simple guides to resolve the problem.
If problem still persists, please contact your local Panasonic dealer or Panasonic Customer Care Centre
for assistance.
White spots or
shadow images
(noise)
•
Check the position, direction,
and connection of the aerial.
No DVB
programmes shown
after Auto Setup
•
Check the DVB transmitter.
•
Adjust the direction of the aerial
to another transmitter installed
nearby.
•
Check the analogue broadcast.
If the image quality is poor,
check the aerial and consult
your nearest dealer.
Interference or
frozen / disappearing
image in DVB
•
Check "Signal Condition". (p. 24)
If "Signal Quality" or "Signal
Strength" are displayed in red
check aerial.
If problem persists consult your
local Panasonic dealer.
•
Turn the TV off with the On / Off
switch, then turn it on again.
36
To customer using indoor aerial
In order to enjoy a good quality DVB image, it is
important to receive a good quality DVB signal. For
this purpose check "Signal Condition" in Tuning
Menu (p. 24). A level of at least 5 is required in order
to provide a good picture. It may be necessary to
adjust the position and direction of the aerial to
achieve the best possible result.
Pictures from an
equipment are unusual
when the equipment is
connected via HDMI
•
Is the HDMI cable connected properly?
(p. 30)
•
Turn Off the TV and equipment, then turn
them On again.
•
Check an input signal from the equipment.
(p. 35)
•
Use an equipment compliant with
EIA/CEA-861/861B.
The remote control
does not work
•
IDTV
Are the batteries installed correctly?
(p. 6)
•
Has the TV been switched On?