Advertisement
RO Buddie
®
& Maintenance Guide
✓
Correct
Installation
1
Blue
Clip
2
✗
Incorrect
3
Push 2x
Tubing
4
Pull
Tubing
5
Blue
Clip
How to Use the Buddie Fit ™ Press Fittings
Making the connections with the ¼" tubing is easy with the
Buddie Fit™ press fittings included.
To properly connect the ¼" tubing to the press fittings, follow
these simple steps:
Collet
Tubing
Collet Flange
1.
Remove the blue clip from the press fitting.
2. Make sure the end of the tubing is cut evenly and not at an angle.
3. Push the tubing into the fitting. You will hit the first stop.
The tubing is still not secured properly. Push the tubing a
second time and you will feel the tubing insert completely
into the press fitting.
4. Pull back on the tubing to ensure it is secure.
5. Insert the locking blue clip back onto the end of the press fitting.
NOTE: To remove a piece of tubing, remove the blue clip
and press down on the collet where the tubing enters the
fitting. While the collet is depressed, remove the tubing from
the fitting.
w w w . a q u a t i c l i f e . c o m
O-ring
4
Advertisement
