Electrolux EWT8541 User Manual page 18

18 www.electrolux.com
NOTE:
Different functions can be combined
which is dependent on the program
selected. When these buttons are
pressed, the corresponding pilot lights
come on.
If you want
washing program , press the "Delay
End" button repeatedly to choose
your machine end time.
5.7 STARTING A PROGRAM
To start a program, press the Start/Pause
button, a default program duration will be
displayed on the screen.
NOTE
When you select the Drain+Spin
program, there will be a delay of at least
2 minutes before the washing machine
starts to spin. This delay is a drain out
period to ensure the bowl is empty of
water, which is necessary before spin
commences. Even though you may
have only put wet clothes into an empty
bowl, the delay before spin will still
occur to be safe and to protect your
washing machine.
5.8 INTERRUPTION OF A PROGRAM
If you have started your wash and you wish
to stop it for some reason, press the
Start/Pause button to enter PAUSE mode.
The time remaining is shown then "
Press the Start/Pause again. The program
will continue.
5.9 CHANGING A PROGRAM
You can turn the Program Selector Knob
to a new program position at any time. If
you do move the Program Selector Knob
the effect will be different depending on
the status of the machine at the time you
do this, as follows:
to define the end of the
When the machine is in PAUSE
mode, moving the Knob to a
new position will result in the
machine resetting to the start of
the new program.
When the machine is running,
moving the Knob to a new
position will result in the machine
continuing the wash and the
display will show "
flashing with 3 consecutive short
beeps to remind you that this
option is not allowed.
5.10 CHANGING THE OPTIONS
It is possible to change only some
option after the program has
started.
1. Press the Start/Pause button to
enter PAUSE mode.
2. Change the options.
3. Press Start/Pause button again.
The program will continue.
AT THE END OF THE
5.11
PROGRAM
-
The appliance stops automati-
cally.
-
The display will show "
and flashing with 3 consecutive
long beeps .
-
Turn the Program Selector knob
".
to the position "Off".
-
Remove the laundry from the
appliance. Make sure that the
washing tub is empty.
- Keep the lid ajar, to prevent the
mildew and odours.
- Turn off the water tap.
" and
"