Vivotek FD9371-HTV User Manual page 226

VIVOTEK
vadp_npackage
thermal_support
thermal_controlmode
thermal_temperaturedete
ction
camctrl_httptunnel
<Not support anymore>
camctrl_ptztunnel
camctrl_privilege
226 - User's Manual
<positive integer> 0/7
<boolean> 0/7
auto, 0/7
customheater
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
Bit 6 => Support shared memory API
Bit 7 => Support digital signature of package
Bit 8 => Support snapshot
Indicate the maximum number of VADP
package that can be uploaded to the device.
Indicate whether to support thermal IC.
Indicate the thermal control mode.
"auto": control by camera automatically
"customheater": the threshold of heater can
be sepcified by user.
* only available when
"capability_thermal_support" is 1.
* We support this parameter when the version
number (httpversion) is equal or greater than
0302a.
Indicate whether to support temperature
detection.
Indicate whether to support httptunnel.
* Not support this parameter anymore when
the version number (httpversion) is equal or
greater than 0301b.
* It will be replaced by
capability_camctrl_ptztunnel.
Indicate whether to support ptztunnel.
* We support this parameter when the version
number (httpversion) is equal or greater than
0301b.
This equals
"capability_camctrl_c0_ptztunnel".
* This is kept for compatibility.
Indicate whether to support "Manage
Privilege" of PTZ control in the security page.
1: support both /cgi-bin/camctrl/camctrl.cgi
and /cgi-bin/viewer/camctrl.cgi
0: support only /cgi-bin/viewer/camctrl.cgi
This is equivalent
to"capability_camctrl_c0_privilege".