Table of Contents
Advertisement
XR-A550MD
QQ
3 7 63 1515 0
Step No.
Setting Method
Step 14
Press the MENU button.
Step 15
Press the MENU button.
Step 16
Press the MENU button.
Step 17
Press the MENU button.
Step 18
Press the MENU button.
Step 19
Press the MENU button.
Step 20
Press the MENU button.
Step No.
Setting Method
Step 1
EJECT status (or No Mechanism status)
Step 2
Press the DISP/CHARA button.
Step 3
Press the MENU button.
♦♦
: Set value
If the ¡ button is pressed while a setting item is being displayed, the set value will increase and the new set value will be set in LSI.
If the 1 button is pressed while a setting item is being displayed, the set value will increase and the new set value will be set in LSI.
If the ¡/1 buttons are pressed and held down, data will change continuously in 100ms cycles.
CONTROL 1
Pit 7: High-frequency weight ON/OFF during recording (0: OFF, 1: ON)
Pits 6 – 4: Play start SD number (30 – 100 sectors; 10-sector steps)
Pit 2 – 0: High-speed jump overrun amount (384 – 830 jumps; 64-jump steps)
CONTROL 2
Pit 4 – 0: EEPROM version (a –)
TE
L 13942296513
8. TEST-PLAY Mode
Step No.
Setting Method
Step 1
Test mode STOP state
Step 2
Press the ENTER button.
Step 3
Press the DELITE button.
`
Press the
button.
Step 4
Continuous playback (pit)
Continuous playback (groove)
Step 5
Press the DELETE button.
Continuous playback (groove)
Step 6
Press the STOP button.
&&&&: Address, ????: Error rate, 555: Number of Jumps
7
If the STOP (
) button is pressed while the TEST-PLAY Menu is displayed, operation moves to Test Mode STOP status.
`
If the
button is pressed while the TEST-PLAY Menu is displayed, continuous playback will commence from the pickup point at that time.
Each time the ENTER button is pressed in Address Setting Mode, the address will change as follows:
0050 = 03C0 = 0700 = 08A0 = 0050 = ........
Each time the DELETE button is pressed in Address Setting Mode, the digits will change as follows with the S.M. JOG button.
0050 = 0050 = 0050 = 0050 = ........
In Address Setting Mode, the designated address digits can be changed +01H / –01H with the S.M. JOG and DELETE buttons (0 – F).
www
If the S.M. JOG button is turned and held down, the data will change in 100ms cycles.
If the DISP/CHARA button is pressed in Continuous Play Mode, the number of Jumps will change as follows:
1 Jump = 10 Jumps = 400 Jumps = 1 Jump = ........
After the number of Jumps is displayed for 1 second, the Address display will be restored [ 555TR_JUMP ]
.
If the S.M. JOG button is turned in Continuous Play Mode, the designated number of Jumps will be executed in FWD/REV directions.
If the S.M. JOG button is turned and held down, the data will change in 100ms cycles.
86
http://www.xiaoyu163.com
Equalizer coefficient B, C (low reflectance groove) setting
Auto level slicer gain (high reflectance) setting
Auto level slicer gain (low reflectance pit) setting
Auto level slicer gain (low reflectance groove) setting
Auto level slicer offset (high reflectance) setting
Auto level slicer offset (low reflectance pit) setting
Auto level slicer offset (low reflectance groove) setting
CONTROL 1 setting
CONTROL 2 setting
TEST-PLAY Menu
ADRES setting (displays standard address initial setting)
Sets Search output to "H" during Search operation and returns to "L" at
start of playback.
(Address + C1 error display)
(Address + C1 error display)
(Address + ADIP error display)
TEST-PLAY Menu
x
ao
u163
y
i
http://www.xiaoyu163.com
2 9
8
Remarks
Remarks
Q Q
3
6 7
1 3
1 5
Remarks
co
.
9 4
2 8
(e) CONTROL Setting
Display
♦♦
[ GDEQBC_
]
♦♦
[ HALSG_ _ _
]
♦♦
[ LALSG_ _ _
]
♦♦
[ GALSG_ _ _
]
♦♦
[ HALSOFS_
]
♦♦
[ LALSOFS_
]
♦♦
[ GALSOFS_
]
Display
[ _ _ EJECT_ _ _ ]
♦♦
[ CONTRL1_
]
♦♦
[ CONTRL2_
]
0 5
8
2 9
9 4
2 8
Display
[ tsm????e?? ]
[ TEST_ PLAY_ ]
[ ADRES _ 0050 ]
[ s &&&& c ???? ]
[ a &&&& c ???? ]
[ a &&&& a ???? ]
[ TEST_PLAY_ ]
m
9 9
9 9
Hide quick links:
Advertisement
Table of Contents
