Installing The Nvidia Quadro Fx Sdi - Nvidia Quadro FX 4800 User Manual

Installing the NVIDIA Quadro FX SDI

Step 1: Install the NVIDIA Quadro FX SDI
1 Power down the system and open the chassis cover.
2 Install the NVIDIA Quadro FX card
a Insert the graphics card into the x16 PCI‐express slot and use a screw to secure the
b Connect the power cable to the auxiliary power connector(s).
3 Install the NVIDIA SDI Output card.
a Insert the NVIDIA SDI Output card into any available type of expansion slot within
b Connect the power cable to the auxiliary power connector.
4 Connect one end of the 14‐pin ribbon cable to the G‐Sync connector on the NVIDIA
Quadro FX card, and the other end to the NVIDIA SDI Output card.
NVIDIA Quadro FX card
NVIDIA SDI Output card
5 Close the chassis cover.
NVIDIA Corporation
Quadro FX 4800/5800 and Quadro CX SDI User's Guide – Version 1.0
card's bracket to the system chassis.
The NVIDIA Quadro FX 5800 requires power to two auxiliary power connections.
six inches of the NVIDIA Quadro FX G‐Sync connector, and use a screw to secure
the card's bracket to the system chassis.
C
HAPTER
NVIDIA Graphics-to-SDI
2
7