Aspect Controls - Panasonic TH 50PH11UK Operating Instructions Manual

ASPECT Controls

The Plasma Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format
picture.
[from the unit]
+
INPUT MENU -/ VOL / ENTER/
For PC signal input:
4:3 ZOOM
For SD signal input (525 (480) / 60i • 60p, 625 (575) / 50i • 50p):
4:3 ZOOM
For HD signal input [1125 (1080) / 60i • 50i • 60p • 50p • 24p • 25p • 30p • 24sF, 1250 (1080) / 50i, 750 (720) / 60p • 50p]:
4:3 H-FILL
[During MULTI PIP Operations]
• Picture and Picture, Picture in Picture :
• Others
Notes:
• Panasonic AUTO can be selected only during Video signal input.
• The aspect mode is memorized separately for each input terminal.
• Do not allow the picture to be displayed in 4:3 mode for an extended period, as this can cause a permanent image
retention to remain on the Plasma Display Panel.
Panasonic AUTO
The display will automatically become enlarged (depending on the picture source), allowing you to view the picture at its maximum size.
4
3
For letter box image Image is expanded
4
Changes in accordance with
the Panasonic AUTO mode
3
setting (see page 36).
For a 4:3 image
All Aspect mode
Set "All Aspect" to "On" in Options menu to enable the extended aspect mode (page 41). When All Aspect mode, the aspect
mode of pictures is switched as follows. For details about the aspect mode, please see "List of Aspect Modes" (page 45).
For VIDEO (S VIDEO) signal input:
4:3 Zoom1 Zoom2
Notes:
• When selecting an input slot that attaches BNC Dual Video Terminal Board (TY-FB9BD), Panasonic Auto cannot be
selected.
• In All Aspect mode, "Panasonic AUTO" is displayed as "Panasonic Auto".
18
Press repeatedly to move through the aspect options:
For details about the aspect mode, please see "List of Aspect Modes" (page 45).
For VIDEO (S VIDEO) signal input:
4:3 ZOOM
JUST
Note:
When selecting an input slot that attaches BNC Dual Video Terminal
Board (TY-FB9BD), Panasonic AUTO cannot be selected.
The aspect mode changes each time the ENTER button is pressed.
FULL
FULL JUST
ZOOM FULL JUST
4:3
: Aspect switching is not possible.
16
Panasonic AUTO
9
Zoom3 Panasonic Auto
Panasonic AUTO
FULL
FULL
Notes:
• Panasonic AUTO mode is designed to automatically adjust the
aspect ratio to handle a mix of 16:9 and 4:3 program material.
Certain 4:3 program material, such as stock market data screens,
may occasionally cause the image size to change unexpectedly.
When viewing such programs, it is recommended that the ASPECT
be set to 4:3.
• If adjusting the PICTURE V-POS/V-SIZE in Panasonic AUTO with
FULL mode, the adjustment is not memorized. When exiting the
mode, the screen will return to a former adjustment.
16:9 14:9 Just