JVC KD-AVX11 Instructions Manual page 51

Warning messages for Bluetooth operations
• Connection Error : The device is registered but the
connection has failed. Use <Connect> to connect
the device again. (☞ page 25)
• Error : Try the operation again. If "Error" appears
again, check if the device supports the function you
have tried.
• Device Unfound : No available Bluetooth device is
detected by <Search>.
• Loading : The unit is updating the phone book and/
or Text Message.
• Please Wait... : The unit is preparing to use
the Bluetooth function. If the message does not
disappear, turn off and turn on the unit, then connect
the device again (or reset the unit).
• Reset 08 : Check the connection between the
adapter and this unit.
Icons for phone types
• These icons indicate the phone type set on the device.
: Cellular phone
: Household phone
: Office
: General
: Other than above
Satellite radio operations
• You can also connect the JVC SIRIUS radio PnP (Plug
and Play), using the JVC SIRIUS radio adapter, KS-
U100K (not supplied) to the CD changer jack on the
rear. (Select "EXT-IN" as the source.)
By turning on/off the power of the unit, you can turn
on/off the JVC PnP. However, you cannot control it
from this unit.
• To know more about SIRIUS Satellite radio or to sign
up, visit <http://www.sirius.com>.
• For the latest channel listings and programming
information, or to sign up for XM Satellite radio, visit
<http://www.xmradio.com>.
Downloaded from Caradio-Manual.com Manuals
iPod/D. player operations
• When you turn on this unit, the iPod/D. player is
charged through this unit.
• The text information may not be displayed correctly.
This unit can display up to 40 characters.
Note:
When operating an iPod or a D. player, some
operations may not be performed correctly or as
intended. In this case, visit the following JVC web
site:
For iPod users: <http://www.jvc.co.jp/english/car/
support/ks-pd100/index.html>
For D. player users: <http://www.jvc.co.jp/
english/car/support/ks-pd500/index.html>
Menu settings
• If you change the <Amplifier Gain> setting
from <High Power> to <Low Power> while
the volume level is set higher than "30," the unit
automatically changes the volume level to "VOL 30."
• After you change any of <Menu Language/Audio
Language/Subtitle> settings, turn off then on the
power, and re-insert the disc (or insert another disc)
so that your setting takes effect.
• When you select <16:9> for a picture whose aspect
ratio is 4:3, the picture slightly changes due to the
process for converting the picture width.
• Even if <4:3 Pan Scan> is selected, the screen size
may become <4:3 Letterbox> for some discs.
51
REFERENCES