Canon POWERSHOT a75 User Manual page 105

Downloaded From camera-usermanual.com Canon Manuals
Selecting Images for Transferring
1
In the [ (Play)] menu, select
(Transfer Order) and press the
SET button.
See Selecting Menus and Settings (p. 65).
2
Use or to
select [Order] and
press the SET
button.
You can remove all the
transfer marks at once by
selecting [Reset].
3
Select images for transferring.
For setting images one by one
Use or to select the
image and mark or
remove checkmarks from
images using or .
The check marks are
displayed when set.
The above method can be used even if you
press the zoom lever toward to switch to
index playback (3-images display).
Various Functions
For setting all images on
the CF card
Switch to index playback
(a set of three images)
by pressing the zoom
lever toward .
Press the SET button, select [Mark all] using
or and press the SET button again to
mark all the images. (If you select [Clear all]
instead of [Mark all], you can remove marks
from all the images.)
You can select images using or and
change the settings using or after
[Mark all] or [Clear all] has been selected.
4
Press the MENU button.
The selection mode will turn off and the
Transfer Order menu will reappear.
Images are transferred in order from
oldest to newest by the shooting date.
A maximum of 998 images can be
marked.
103