connections
inSTAllinG THE WAll MOUnT
You can use the wall mount bracket to mount this unit on a wall.
installation precautions
•
Do not install on a place other than vertical wall.
•
For the installation, avoid high temperature or humidity, or wall that cannot sustain the weight of the set.
•
Check the strength of the wall. If the strength of the wall is insufficient for the product installation, make
sure to reinforce the wall before the installation.
•
Check the material of the wall. If the wall is made of plaster board, marble, or iron board, purchase and
use the appropriate fixing screws.
•
Cables connecting to external devices are to be connected to the set before installing.
•
Be sure to turn off and unplug the unit before installation. Otherwise, it may cause electric shock.
1. Place the wall mount bracket on a wall surface and then
secure it with two screws (not supplied).
. Then, fit the unit into the corresponding slots of the wall
mount bracket. For secure installation, make sure the
mounting studs slide firmly down into the bottom of the
slots.
. This is the completion of the suggested wall mount
installation.
Downloaded From TheatreSystem-Manual.com Manuals
▪
Do not hang onto the installed unit and avoid any impact to the unit.
▪
Secure the unit firmly to the wall so that it does not fall off. If the unit falls off, it may result in
an injury or damage to the product.
▪
When the unit is installed on a wall, please make sure that a child does not pull any of
connecting cables, as it may cause it to fall.
▪
For the optimal performance in a wall mount installation, keep the speaker system at least
2 inches (5 cm) distant from the TV.
1
inches (5 cm) or more
11