ROHS Hyper Bar 252 User Manual page 8

www.divinelighting.com
Note：In order to avoid failures and interference with signal transmission，use a
terminator plug. Between pins 2 and 3, connect a resistance120Ω（1/4W） at the end
of the DMX connecting as below:
 Conversion between 3-pin and 5-pin XLR

If the output cable of DMX 512 controller is the 5-PIN, please use a 5-PIN to 3-PIN
adapter.
 Light connecting picture：
10. Connection Diagram
6
Hyper Bar 252 v1.0