Fill The Moistener - Pitney Bowes Relay 1000 Operator's Manual

2 • System Setup

Fill the Moistener

The oval window on the front of the
moistener provides an easy view of
the current fluid level. When the fluid
gets low, refill the moistener.
1. Slide the moistener out to the
right.
IMPORTANT!
while the system is processing material.
2. Carefully fill the moistener with
E-Z Seal
®
the "Max" mark in the filler funnel.
We recommend E-Z Seal
minimize algae growth and scale
buildup.
3. Slide the moistener back into the system. From a dry state, the
moistener takes about five minutes to become fully wet and ready for
use.
2-4
Never open the moistener
solution or water up to
to
®
SV63176 RevB