Download Print this page

Storm Ninja 250 User Manual

Quadcopter with foxeer 700tvl cmos camera

Hide thumbs

page of 10

/ 10
Bookmarks

Quick Links

Download this manual

Ninja 250

Storm Racing Drone

With CC3D Controller

USER MANUAL

Need help?

Do you have a question about the Ninja 250 and is the answer not in the manual?

Questions and answers

Summary of Contents for Storm Ninja 250

Page 2 DISCLAIMER Please read this disclaimer carefully before using this product. This product is a hobby with motors but not a toy which is not suitable for people under the age of 18. By using this product, you hereby agree to this disclaimer and signify that you have read them fully.
Page 3 Package includes: 1. Fully Assembled Storm Ninja 250 w/ FPV System (Camera and Transmitter) 2. RadioLink AT9 Radio System 3. Storm 14.8V 1000mah 65C Li-Po Battery 4. SKYRC E4 Charger 5. 6pcs Clockwise HQ 5040 Propeller (4 of them are spare) 6.
Page 8 FPV System Our video transmitter has up to 32 different video channels available to avoid interference with other channels. If two or more drones are flying at the same time, try to select different video frequency to avoid video interference. The bigger different in video frequency between drones, the less interference generated.
Page 9 Lost connection with radio controller If you’re the drone cannot response to the radio controller stick travel, the connection between radio controller and receiver may lost and you can try to re-bind them by following the procedure below: Press the switch inside the receiver twice with small screwdrivers to make LED indicator turns PURPLE to set the control mode to D Bus Mode.
Page 10 3) [TYPE] = AIRCRAFT [SELECT] = 01 [NAME] = SRD-CC3D (Any name you want) Go to [AUX-CH] -> ATTITUDE, apply the setting below: [CH5] = ------- [CH6] = VrA [CH7] = VrB [CH] = CH5 [SW3] = SwG [SW2] = SwD [CH8] = SwE [CH9] = SwF [CH10] = SwC [STABL.] = 0% [STABL.] = 25% [STABL.] = 35% [ARCO] = 50% [ARCO] = 75% [ARCO] = 100%...

This manual is also suitable for:

Srd250 v3