Setting The Projector Id - Epson POWERLITE 1970W User Manual

Caution: Leave at least 20 inches (50 cm) of space between the projectors to prevent them from
overheating.

Setting the Projector ID

Setting the Remote Control ID
Matching Multiple-Projector Display Quality
Parent topic:
Setting the Projector ID
If you want to control multiple projectors from a remote control, give each projector a unique ID.
1. Press the Menu button.
2. Select the Extended menu and press Enter.
3. Select Projector ID and press Enter.
4. Use the arrow buttons on the remote control to select the identification number you want to use for
the projector. Then press Enter.
Repeat these steps for all the other projectors you want to operate from one remote control.
Parent topic:
Adjusting Projector Features
Projector Identification System for Multiple Projector Control