Elvox 46216.310E Installation And Operation Manual page 13

You may use the above default settings when you log in the camera for the first time.
1) Set the IP address of the PC and make sure the network segment should be as the same as the default settings of IP-CAM.
Open the network and share center. Click "Local Area Connection" to pop up the following window.
Select "Properties" and then select Internet protocol according to the actual situation (for example: IPv4). Next, click "Properties"
button to set the network of the PC.
2) Open the IE Browser and input the default address of IP-CAM and confirm. The IE browser will download Active X control
automatically.
3) After downloading Active X control, the login dialog box will pop up.
4) Input the default username and password and then enter to view.
EN
255 . 255 . 255 . 0
IP Address 192 .168 . 1 . 201
Gateway 192 .168 . 1 . 1
Subnet Mask 255 . 255 . 255 . 0
192 .168 . 1 . 1
Gateway
Modify
Modify
11