Washing Clothes Using Fuzzy Logic; Setting Prewash; Washing Clothes Manually - Samsung SWF-P12 Owner's Instructions Manual

Washing a Load of Laundry
To add liquid detergent:
1. Remove the divider from its slot and insert it into compartment
2. Pour in the liquid detergent.
•
Liquid detergents and delay start(please see "delay start" page 6).
With delay start use a dosage container for liquid detergents,e.g. ball, otherwise
the liquid detergent will run slowly out of the soap dispenser and congeal. If
this happens blockages and a nasty smell, take dosage container out of the
drum at the end of the programme.
With liquid detergents use the liquid insert in the soap dispenser. Or use dosage
aids,e.g. dosage or bags which are provided with the detergent.

Washing clothes using fuzzy logic

Your new washing machine makes washing clothes easy, using Samsung's "fuzzy
logic" automatic control system. When you select an automatic wash program, the
machine will automatically set the correct temperature, washing time, and rinse
speed according to the weight of the clothes.
To wash clothes using the fuzzy logic programs:
1. Turn on your sink's water faucet.
2. Press the (On/Off) button.
3. Press the Door Open button.
Note: You cannot open the door until you press
4. Open the door.
5. Load the articles one at a time loosely into the drum, without overfilling.
6. Open the door.
7. Add the detergent, softener, and prewash detergent (if necessary) into
the appropriate compartment.
Note:
Prewash is only available when washing cotton, synthetic, delicate
garments. It is only necessary if your cotton clothing is heavily soiled.
If you wish to use prewash, please see "Setting prewash" on page 9.
8. Turn the Fuzzy Control dial to the type of clothes you are washing:
Cotton, Synthetic, Delicate, Wool, Speedy (for a fast cycle) and Eco (to
economize on water usage).
8
SAMSUNG Washing Machine Owner's Instructions
.
(On/Off).
Washing a Load of Laundry
You will see the indicators light up on the control panel.
9. At this time, you can control the wash temperature, spin speed and
delay time by pressing option button.
Example) In SWF-P12 case, if you want 40°C, 1000 rpm, press the
tempera ture button 5 times and then press the spin button 6 times.
10.Press the Start/Pause button on the Fuzzy Control dial and the wash
cycle will begin.
The time delay indicator will light up and the remaining time for the
cycle will appear in the display.
When the cycle is finished:
When 10 minutes passed after total cycle is finished, then power will turn off
automatically.
1. Press the Door Open button.
2. Remove laundry.

Setting prewash

Prewash is only available when washing cotton, synthetic, delicate clothes. To
use prewash:
1. Load the prewash detergent into compartment
2. Select "Cotton" with the Fuzzy Control dial.
3. Press the Function button until the "Prewash" indicator lights up on the
control panel.
4. Press Start/Pause to begin the cycle.

Washing clothes manually

You can wash clothes manually without using the fuzzy logic feature. To do so:
1. Turn on the water at the water source sink.
2. Press the (On/Off) button on the washing machine.
3. Press the Door Open button.
Note: You cannot open the door until you press
4. Open the door.
5. Load the articles one at a time loosely into the drum, without overfilling.
6. Close the door.
7. Put the detergent and, if necessary, softener or prewash detergent, in the
appropriate compartments.
of the detergent drawer.
(On/Off).
SAMSUNG Washing Machine Owner's Instructions 9