Washing A Load Of Laundry; Overview Of The Control Panel; Washing For The First Time; Putting Detergent In The Washing Machine - Samsung SWF-P12 Owner's Instructions Manual

Washing a Load of Laundry

Overview of the control panel

1
1. Detergent dispenser
2. Display panel
Displays the remaining wash cycle time, error messages.
3. Temperature selection button
Press the button repeatedly to cycle through the available water temper-
ature options (cold water, 30°, 40°, 60° and 95° C).
When press this button during washing, you can see the selected tem-
perature on display panel.
4. Spin selection button
Press the button repeatedly to cycle through the available spin speed
options [ P12: (0, 400, 600, 800, 1000 and 1200 rpms.) ,
P10: (0, 400, 600, 800 and 1000rpms), P8: (0, 400, 600 and 800 rpms)].
When press this button during operating, you can see the selected the
spin speed on display panel.
5. Delay Start button
Press the button repeatedly to cycle through the available delayed start
options (from 1 hour to 24 hours in one hour increments).
6. Function button
Press the button repeatedly to cycle through the available partial wash
options {Wash+Rinse+Spin
Rinse(1 time)+Spin Rinse(2 times)+Spin
Wash+Rinse+Spin}.
Note : Prewash is available only for Cotton, Synthetic, Delicate.
"Rinse(3 times)+Spin" is not available when Speedy,Eco course.
7. Fuzzy Control dial
Turn the dial to select one of the six available wash programs (Eco,
Speedy, Wool, Delicate, Synthetic or Cotton).
8. Start/Pause button
Press to pause and restart programs.
9. Door Open button
Press to open the washing machine door.
10. (On/Off) button
Press once to turn the washing machine on, press again to turn the wash-
ing machine off. If the washing machine power is left on for longer than
10 minutes without any buttons being touched, the power automatically
turns off.
6
SAMSUNG Washing Machine Owner's Instructions
2 3 4 5 6 7 8 9 10
Prewash+Wash+Rinse+Spin Spin
Rinse(3 times)+Spin
Washing a Load of Laundry

Washing for the first time

Before washing clothes for the first time, you must run a complete cycle
without clothes. To do this:
1. Press the (On/Off) button .
2. Pour a little detergent into compartment in the detergent drawer.
3. Turn on the water supply to the washing machine.
4. Press the Temperature button repeatedly until 40° C is displayed.
5. Press the Start/Pause button.
•
This will remove any water remaining in the machine from the manu-
facture's test run .

Putting detergent in the washing machine:

1. Pull out the detergent drawer.
2. Add laundry detergent into compartment
.
3. Add softener into compartment (if you desire).
4. Add prewash detergent into compartment
Option
*
Using Hot Water
• The hot water valve is operated when you select above 60°C water
temperature option (60°C and 95°C).
(if you desire).
SAMSUNG Washing Machine Owner's Instructions 7