Network Mailbox; Registering Handsets Manually; De-Registering Handsets - Swisscom Aton CL114 User Manual

The following functions can be selected with
Delete Entry Delete current entry.
Copy to Dir. Copy an entry to the directory.
Date/Time Call date and time (if set).
Status New Call: new missed call. Old Call: entry already read.
Delete List Warning! All old and new entries will be deleted.
Calling back a caller from the calls list
' ¤ q
CallsList 01+02
Network mailbox list
You can use these lists to listen to messages on the network mailbox (
New messages can only be deleted during playback of message body.
Setting a different language
You can change the language for the voice prompt and default announcement.
¤ q
§Menu§
Answer Machine

Network mailbox

The network mailbox is the answering machine in your provider's telephone network. More information is available from
your provider. You cannot use the network mailbox unless you have requested it from your provider.
In order to use the network mailbox quickly and easily via the network mailbox list (
¢
and to use fast access (
¤ q
§Menu§
Answer Machine
Locating a handset (paging)
You can locate your handset using the base station.
¤
Briefly press the registration/paging key on the base station (
All handsets will ring at the same time (paging), even if the ringers are switched off.
Ending paging: Briefly press the registration/paging key on the base station (
a
end call key on the handset.

Registering handsets manually

You can register up to four handsets on your base station. Each additional handset must be registered on the base sta-
tion in order for it to work properly!
1) On the handset
¤ q
¤
§Menu§
Settings
¤ ¤
§OK§
ting: 0000) Registering is displayed.
2) On the base station
Within 60 seconds, press and hold the registration/paging key on the base station (
Registration takes approx. 1 minute. Once the registration process has been completed successfully, the display briefly
shows HS registered and returns to idle status. Handsets are assigned the lowest available internal number (1-4). If the
internal numbers 1–4 are already assigned to other devices, the number 4 will be overwritten.

De-registering handsets

You can de-register all other registered handsets from each of the registered Aton handsets.
¤ q
¤
§Menu§
Settings
register. The handset you are currently using is indicated by <.
¤
§OK§
0000)
q
¤ q
¤
§OK§
(select entry)
¤ q
¤
§§OK§§
Language
page 1), you will need to enter the number in your phone:
¤ q
¤
§OK§
Net Mailbox
¤ q
¤
§OK§ §OK§
Handset
¤ q
¤
§OK§ §OK§
Handset
9
:
¤ c
¢
¤ q
¤
§§OK§§
(select language)
~
¤
(enter number)
¢
page 1).
¤ q
¤
Register HS Enter the base station system PIN (default set-
¤ q ¤ q
De-register HS
¤ ¤
§OK§
Enter the base station system PIN (default setting:
page 9).
¤
§OK§
¢
page 8), the menu (
¤
§OK§
¢
page 1) or press the talk key
¢
page 1) for approx. 3 seconds.
Select the internal party you wish to de-
¢
page 16)
c
or the