Input setup cont.
Stereo processing
Choose preferred stereo processing mode for the current source.
Multichannel processing
Choose preferred multichannel processing mode for the current source.
Lip sync
source.
Zone 2 (CXR200 only)
CXR Setup Menu
Speaker Setup
Zone 2 Power
Input Setup
Zone 2 Source
Zone 2 Settings
Zone 2 Power On Volume
Network Setup
General Settings
HDMI Output Setup
Advanced Setup
HDMI 2 will output the audio as formatted by the chosen source, either stereo
downmix signal will be output.
Zone 2 line level and speaker outputs
for Zone 2, then the zone 2 source must have a stereo audio input selected.
Zone 2 speaker outputs
Zone 2
zone 2.
14
On
Follow Main Zone
- 30 dB
Zone 2
Controlling zone 2
You can use the main remote handset, the buttons on the front of the unit
From the remote press and hold the Zone 2 button followed by the feature
you require.
Zone 2 power
Enables the Zone 2 function.
Zone 2 source
Select the video/audio source that will be sent to Zone 2.
Zone 2 power on volume
Set the desired maximum volume level when powering on Zone 2.
Network setup
CXR Setup Menu
Speaker Setup
Connection Information
Input Setup
Network Setup
Zone 2 Settings
Wireless Setup
Network Setup
Retry Connection
General Settings
HDMI Output Setup
Advanced Setup
To use CXR for Internet Radio/Audio Streaming you need:
Use a wired connection for seamless playback of high resolution 24/176 and
Connecting to a wired network
Internet
Router/Modem
Connect a network cable (Category 5/5E or better, straight through Ethernet
cable) between the CXR and your router.
Network setup
For advanced users wanting to use a static IP. Only select static IP if you
know exactly what you are doing!
Wireless setup
Internet
Router/Modem
Connect the supplied wireless antenna to the correct USB input on the rear
of CXR – it will need to be in range of your wireless router.
Not Connected
Ethernet cable
10-30m distance